Products

MPH-24 is a module with the reach of powder to  up to 20 meters. Is used for protection of large surfaces , locations, technologies and objects and for protection of objects with heightened danger and fire load.

The module is used for effective fire protection of residential and non-residential buildings and premises of all types and purposes, facilities, warehouses, territories, monuments, churches, garages.

It is safe for humans, animals, property and environment.

It is designated for automatic extinguishing of fires of classes A (solids), B (liquids), C (gases), and E (electrical appliances).

Temperature fire detection sensors TPS-01 form a familt of unique autonomous sensors and activators.

Sensors are produced in three temperature modifications: 72 degrees, 93 degrees and 110 degrees (Celsius).

When the designated temperature is reaching around the sensor, it is activated and using the electrical signal it initiates the extinguishing using the MPH modules.

One sensor can activate up to 6 MPH modules.

Sensors can be used in any interior location, where operational temperature does not reach extreme conditions.

Sensors TPS-01 do not require any source of energy.

Fourth sensor is a manual activator TPS-01M.

Sensor works on a principle of manual activator, where it is necessary to remove a safety pin, which activates the extinguishing using the MPH modules.

Usage of this type of sensors is suitable for manual activation of extinguishing on the objects with operator (production facilities, conveyor belts) or for activation of extinguishing by public (petrol stations).

Sensors TPS-01M do not require any source of energy.

Temperature activators in special modifications TPS-03 are unique temperature sensors and activators, that work extreme temperature conditions from 120 to 220 degrees Celsius, which allows their usage in place, where TPS-01 sensors cannot be used.

Purpose of activators is detection of fires and further activation of systems of powder fire extinguishers based on MPH and also alarm shstems SA-01 of multiple modifications.

Into the spheres of usage of such fire detection devices belongs mines, trains, furnaces and other technological equipment with high operational temperature.

Pozor: Spúšťač nie je autonómny a vyžaduje prípojenie k zdroju energie.

Moduly MPH v tranport modifications are marked as T (MPH-2.8T, MPH-24T, MPH-5T and are produced in red color.

Modules are to be used in technological locations (production), vehicles and technical motorized vehicles, because they are produced to withstand harsh environment (gases, acidic environment, high temperature) and vibrations through the usage of compensation cushions. Modules may also be used in mines, because it is possible to equip them with a "SuperSeal" connector „SuperSeal“, which eliminates the possibility of the electrical interference during the activation of modules.

These modules can also be equipped with a routing pipe vystrelu prášku (MPH-2.8T), aby mohli privádzať prúd prášku pri vystrelení do reaches the motor compartment of the vehicles or machines, while the modules are installed in the safe distance (of vehicles, lorries, trains, drills). Podobný princíp funguje i s MPH-24T, kde je možné privádzať prášok naráz do niekoľkých otvorov pomocou odbočiek na vystupnom potrubí.

In case of usage in highly aggresive location, it is possible to equip the module with additional outer cover, which will protect outer casing of the module.

Modules in the T modification are also used in systems Raptor and Ranger.

MPH-5M is a complete manual system of fire extinguishing, which consists of a module MPH-5M internal activator TPS-04 and a handle.

In case of fire, it is possible to activate a system with opening of a safety cap and release of the activation pin and throwing the system into the hotbed of fire.

System is suitable for fire suppression up to the arrival of a fire-fighters or for to open the escape route.

Thanks to the simple installation and practical mount, system is suitable for installation on a vehicle (dustmen, police, fire-fighters) or a wall (production lines, underground parkings).

APPS MPH-5T is autonomous and automatic system of fire extinguishing. Thanks to supporting pad with vibration compensation function, it is possible to lay the system directly on the place of protection without any further installation or fixation.

System is engineered for usage and protection of cable channels, attics, plasterboard ceilings, but can also be used on places where it is not possible to install the system using the stable installation measures.

System activates at temperature, which depends on the type of TPS-01T sensor, which is mounted on the front side of the system (73, 93, or 110 defrees Celsium).

System shoots powder radially around its own axis because of this, during the extinguishing there is no pushback created.

Systém môže byť tiež vybavený konektorom „SuperSeal“, ktorý umožňuje použitie systému v mines.

System TPS-920.24  „Ranger“ is autonomous and mobile solution designated for the protection of large surfaces, volumes and areas, where is not dislocated mobile unit of far extinguishing, such as production areas and centers, sport airports, factories of waste management and others.

chassis consist of kmetal pallet, which is used to easily move the system using the pallet truck. Additional fixation of the system is not needed, although in case of installation onto a pick up or a truck, it is possible to ensure the system with additional feixation by using the vehicle mounting straps.

System consists of nine modules MPH-24, which are equipped with activation devices in a form of a button or/ and manual activator TPS-01-M and are mounted into the tower, which enables rotation of a system in both horizontal and vertical way, without the need to rotate the chassis.

Reach of powder in process of active extinguishing is up to 20 meters and when using the extender up to 25 meters.

Temperature detection sensors TPS-01C for a family of unique autonomous sensors and activators.

Sensors are produced in three temperature modifications: 72 degrees, 93 degrees and 110 degrees, but are also equipped with an information channel, which sends the signal to the fire panel or other device after the activation.

When the designated temperature is reaching around the sensor, it is activated and using the electrical signal it initiates the extinguishing using the MPH modules.

One sensor can activate up to 6 MPH modules.

Sensors can be used in any interior location, where operational temperature does not reach extreme conditions.

Sensors TPS-01C do not require any source of energy.

Temperature detection sensors TPS-01T form a family of unique autonomous sensors and activators produced especially for vehicles and transportation devices and extreme conditions.

Sensors are produced in three temperature modifications: 72 degrees, 93 degrees and 110 degrees (Celsius). 

Sensor in this modification is equipped with a compensation pad, which regulates the amount of vibrations and cover of temperature element, which secures and protects the active par of a sensor. This elements do not affect the effectivity of a sensor.

When the designated temperature is reaching around the sensor, it is activated and using the electrical signal it initiates the extinguishing using the MPH modules.

One sensor can activate up to 6 MPH modules.

Sensors may be used in both internal and external hazardous locations (mines, chemical factories) and vibrations (vehicles, trains, conveyor belts).

Sensor may also be equipped with information channel, which on the activation sends signal to the fire protection panel or other device - such modification is named TPS-01TC.

Sensors TPS-01T do not require any source of energy.

System TPS-431.24  „Raptor“ is optimal autonomous and mobile solution designated for the protection of large surfaces, volumes and areas, where is not dislocated mobile unit of far extinguishing, such as production areas and centers, sport airports, factories of waste management and others.

System can be equipped with two different types of chassis:

Stable wheels which help to easily move system using the handle to the place of fire by any available vehicle. In this case, it is necessary lay down the support legs, which will secure the stable fixation of system during the shooting of powder.

Metal pallet which is used to easily move the system using the pallet truck. Additional fixation of the system is not needed.

System consists of for modules MPH-24, which are equipped with activation devices in a form of a button and/ or manual activator TPS-01M

System is constructed to enable fast change of empty modules if the continued extinguishing is needed.

Reach of powder in process of active extinguishing up to 20 meters.

MPH-10st is a module with regulated angle setting of powder discharge. It is used in cases where it is necessary to protect the technology or other surface from a different positions (for instace production lines or conveyor belts).

The module is used for effective fire protection of residential and non-residential buildings and premises of all types and purposes, facilities, warehouses, territories, monuments, churches, garages.

It is safe for humans, animals, property and environment.

It is designated for automatic extinguishing of fires of classes A (solids), B (liquids), C (gases), and E (electrical appliances).

The module is used for effective fire protection of residential and non-residential buildings and premises of all types and purposes, facilities, warehouses, territories, monuments, churches, garages.

It is safe for humans, animals, property and environment.

It is designated for automatic extinguishing of fires of classes A (solids), B (liquids), C (gases), and E (electrical appliances).

The module is used for effective fire protection of residential and non-residential buildings and premises of all types and purposes, facilities, warehouses, territories, monuments, churches, garages.

It is safe for humans, animals, property and environment.

It is designated for automatic extinguishing of fires of classes A (solids), B (liquids), C (gases), and E (electrical appliances).

The module is used for effective fire protection of residential and non-residential buildings and premises of all types and purposes, facilities, warehouses, territories, monuments, churches, garages.

The module is particularly suitable for the protection of raised floors, ducts under plasterboard ceilings and cable ducts.

The powder from the module is fired horizontally.

It is safe for humans, animals, property and environment.

It is designated for automatic extinguishing of fires of classes A (solids), B (liquids), C (gases), and E (electrical appliances).

The module is used for effective fire protection of residential and non-residential buildings and premises of all types and purposes, facilities, warehouses, territories, monuments, churches, garages.

It is safe for humans, animals, property and environment.

It is designated for automatic extinguishing of fires of classes A (solids), B (liquids), C (gases), and E (electrical appliances).

The module is used for effective fire protection of residential and non-residential buildings and premises of all types and purposes, facilities, warehouses, territories, monuments, churches, garages.

It is safe for humans, animals, property and environment.

It is designated for automatic extinguishing of fires of classes A (solids), B (liquids), C (gases), and E (electrical appliances).

The module is used for effective fire protection of residential and non-residential buildings and premises of all types and purposes, facilities, warehouses, territories, monuments, churches, garages.

It is safe for humans, animals, property and environment.

It is designated for automatic extinguishing of fires of classes A (solids), B (liquids), C (gases), and E (electrical appliances).

The module is used for effective fire protection of electrical wiring and cabinets. It is suitable for the protection of cable ducts and wells, motors, intersection spaces, raised floors and storage spaces.

It is designated for automatic extinguishing of fires of classes A (solids), B (liquids), C (gases), and E (electrical appliances).